Does anyone know actinic settings for fasthosts windows 2003 server - The path from t

[gevork]

Hi,
Im trying to install actinic on a windows 2003 server on Fasthosts. Its worked before but this time it says this once ive uploaded and then try to download orders;

The path from the cgi-bin to the acatalog directory is not correct.
It appears as if the acatalog directory does not exist on the remote host.

Possible Cause:
The path from the cgi-bin to the acatalog directory is not correct.
The acatalog directory has been
removed or renamed.
Recommendation:
Abort
Resolution:
Run the Web | Configure Web Site Details. Check "Confirm Each Setting" and verify that the setup looks correct. Verify that the acatalog directory exists on the web site and is readable by the web server. Then try to refresh the site.


My network settings are as follows;

SCRIPTID 1
SCRIPTEXT .pl
SMTPHOST smtp.sewitall.com
WEBSITEURL http://www.sewitall.com/
IGNOREPASSIVEERRORS true
USERELATIVECGIURLS false
PATHTOPERL c:\perl\bin
USEENHANCEFTP false
CATALOGURL http://www.sewitall.com/acatalog/
CGIBINURL http://www.sewitall.com/cgi-bin/
PATHFROMCGITOCATALOG ./acatalog/
CODEBASE ./
FTPHOST ftp.sewitall.com
FTPUSERNAME *******
FTPPASSWORD ********
PATHTOCGIBIN htdocs/cgi-bin/
USEPASSIVEFTP true
FTPPATHFROMCGITOCATALOG ../acatalog/


these are the settings as advised by fasthosts.. does anyone have an idea what is going on.

[gevork]

Problem solved,

the thing that causes the problem is you need to check passive transfer for upload.. but using broadband.. you have to uncheck it to download..

That only took a few days.

~G